Advertisement
Command Modes
EXEC
EXEC Privilege
Command
Version 7.8.1.0
History
Version 7.6.1.0
Version 7.5.1.0
pre-Version 6.1.1.1
Usage
If you are using Multi-Process OSPF, you must enter the Process ID to view information regarding a
Information
specific OSPF process. If you do not enter the Process ID, only the first configured process is listed.
Example
Figure 38-15. Command Example: show ip ospf process-id database summary
FTOS#show ip ospf 100 database summary
Introduced support of Multi-Process OSPF.
Introduced on S-Series
Introduced on C-Series
Introduced on E-Series
OSPF Router with ID (1.1.1.10) (Process ID 100)
Summary Network (Area 0.0.0.0)
LS age: 1551
Options: (No TOS-capability, DC, E)
LS type: Summary Network
Link State ID: 192.68.16.0
Advertising Router: 192.168.17.1
LS Seq Number: 0x80000054
Checksum: 0xb5a2
Length: 28
Network Mask: /24
TOS: 0 Metric: 1
LS age: 9
Options: (No TOS-capability, No DC, E)
LS type: Summary Network
Link State ID: 192.68.32.0
Advertising Router: 1.1.1.10
LS Seq Number: 0x80000016
Checksum: 0x987c
Length: 28
Network Mask: /24
TOS: 0 Metric: 1
LS age: 7
Options: (No TOS-capability, No DC, E)
LS type: Summary Network
Link State ID: 192.68.33.0
Advertising Router: 1.1.1.10
LS Seq Number: 0x80000016
Checksum: 0x1241
Length: 28
Network Mask: /26
TOS: 0 Metric: 1
Open Shortest Path First (OSPFv2 and OSPFv3) | 1051
Advertisement
