Advertisement
Command
Version 7.8.1.0
History
Version 7.4.1.0
Usage
You can configure an arbitrary value in the IP address for each router. However, each router ID must be
Information
unique.
If this command is used on an OSPFv3 process that is already active (has neighbors), all the neighbor
adjacencies are brought down immediately and new sessions are initiated with the new router ID.
Related
clear ipv6 ospf process
Commands
show crypto ipsec policy
e
Display the configuration of IPsec authentication and encryption policies.
t
Syntax
show crypto ipsec policy [name name]
Parameters
name name
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
Version 8.4.2.0
History
Usage
The show crypto ipsec policy command output displays the AH and ESP parameters configured in
Information
IPsec security policies, including the SPI number, keys, and algorithms used.
Related
show crypto ipsec sa ipv6
Commands
Added support for C-Series
Introduced
Reset an OSPFv3 router process
(OPTIONAL) Displays configuration details about a specified policy.
Introduced
Display the IPsec security associations used on OSPFv3 interfaces.
Open Shortest Path First (OSPFv2 and OSPFv3) | 1077
Advertisement
