Advertisement
Command Modes
CONFIGURATION
Command
Version 7.6.1.0
History
Version 7.5.1.0
E-Series legacy command
Usage
When the number of messages reaches the limit you set with the
Information
messages are deleted as newer ones are added to the table.
Related
show logging history
Commands
logging monitor
c e s
Specify which messages are logged to Telnet applications.
Syntax
logging monitor [level]
To disable logging to terminal connections, enter no logging monitor.
Parameters
level
Defaults
7 or debugging
Command Modes
CONFIGURATION
Command
Version 7.6.1.0
History
Version 7.5.1.0
E-Series legacy command
Related
default logging monitor
Commands
logging on
c e s
Specify that debug or error messages are asynchronously logged to multiple destinations, such as
logging buffer, Syslog server, or terminal lines.
Syntax
logging on
To disable logging to logging buffer, Syslog server and terminal lines, enter no logging on.
Defaults
Enabled
Command Modes
CONFIGURATION
Command
Version 7.6.1.0
History
Support added for S-Series
Support added for C-Series
Display information logged to the history buffer.
Indicate a value from 0 to 7 or enter one of the following parameters: emergencies, alerts,
critical, errors, warnings, notifications, informational, or debugging.
The default is 7 or debugging.
Support added for S-Series
Support added for C-Series
Returns the logging monitor parameters to the default setting.
Support added for S-Series
logging history size
command, older
SNMP and Syslog | 1377
Advertisement
