Dell Force10 TeraScale E Series Reference Manual page 1154

Command
History
Usage
Information
Related
Commands
untagged destination
e
x
Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
Related
Commands
1154 | Port Monitoring
Version 8.4.1.2
To reconfigure destination ports in a remote-port mirroring session as untagged ports, enter the
untagged destination command.
untagged Configure destination ports to remove the reserved VLAN tag from mirrored traffic.
destination
Configure destination ports for remote port mirroring so that the reserved VLAN tag is removed from
mirrored traffic sent to an analyzer.
untagged destination {single-interface | range interface-range}
single-interface
Specifies one of the following interface types:
•
•
range
Specifies one of the following interface ranges:
interface-range
•
•
A space is required before and after the dash (-).
For example:
untagged destination range gigabitethernet 1/2 - 4
Destination ports send untagged packets to an analyzer so that the reserved VLAN ID is removed and
the original monitored packet is mirrored.
MONITOR SESSION (conf-mon-sess-session-ID)
Version 8.4.1.2
To configure destination ports in a remote-port mirroring session as tagged ports, enter the
destination command.
tagged Configure destination ports to add the reserved VLAN tag to mirrored traffic.
destination
Introduced on the E-Series ExaScale.
1-Gigabit Ethernet: Enter gigabitethernet slot/port.
10-Gigabit Ethernet: Enter tengigabitethernet slot/port.
gigabitethernet slot/first_port - last_port
tengigabitethernet slot/first_port - last_port
Introduced on the E-Series ExaScale.
tagged