Download Print this page

Dell Force10 TeraScale E Series Reference Manual page 1043

Ftos command line, ftos 8.4.2.7

Advertisement

Table 38-5. Command Example Descriptions: show ip ospf process-id database
external
Item
LS Seq Number
Checksum
Length
Network Mask
Metrics Type
TOS
Metrics
Forward Address
External Route Tag
Related
show ip ospf database
Commands
show ip ospf database network
c e s
Display the network (type 2) LSA information.
Syntax
show ip ospf process-id database network [link-state-id] [adv-router ip-address]
Parameters
process-id
link-state-id
adv-router
ip-address
Command Modes
EXEC
EXEC Privilege
Command
Version 7.8.1.0
History
Version 7.6.1.0
Version 7.5.1.0
pre-Version 6.1.1.1
Description
Identifies the link state sequence number. This number enables you to identify
old or duplicate LSAs.
Displays the Fletcher checksum of an LSA's complete contents.
Displays the length in bytes of the LSA.
Displays the network mask implemented on the area.
Displays the external type.
Displays the TOS options. Option 0 is the only option.
Displays the LSA metric.
Identifies the address of the forwarding router. Data traffic is forwarded to this
router. If the forwarding address is 0.0.0.0, data traffic is forwarded to the
originating router.
Displays the 32-bit field attached to each external route. This field is not used by
the OSPF protocol, but can be used for external route management.
Displays OSPF database information.
Enter the OSPF Process ID to show a specific process.
If no Process ID is entered, command applies only to the first OSPF process.
(OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value depends
on the LSA type, and it can be one of the following:
the network's IP address for Type 3 LSAs or Type 5 LSAs
the router's OSPF router ID for Type 1 LSAs or Type 4 LSAs
the default destination (0.0.0.0) for Type 5 LSAs
(OPTIONAL) Enter the keywords
information about that router.
Introduced support of Multi-Process OSPF.
Introduced on S-Series
Introduced on C-Series
Introduced on E-Series
adv-router
ip-address to display only the LSA
Open Shortest Path First (OSPFv2 and OSPFv3) | 1043

Advertisement

loading