Advertisement
show cam pbr
c e s
Syntax
Parameters
Defaults
Command Modes
Command
History
Example
FTOS#show cam pbr linecard 2 p 0
TCP Flag: Bit 5 - URG, Bit 4 - ACK, Bit 3 - PSH, Bit 2 - RST, Bit 1 - SYN, Bit 0 – FIN
Cam
Port VlanID Proto Tcp
Index
------------------------------------------------------------------------------------------------------
.
.
.
15230 _
10
FTOS#
Usage
Information
Related
Commands
1092
|
Policy-based Routing (PBR)
Display the PBR CAM content.
show cam pbr {[interface interface] | linecard slot-number port-set number]} [summary]
interface interface
linecard slot-number
port-set number
summary
No default values or behavior
EXEC
Version 7.4.1.0
Introduced
Figure 39-1. Command example: show cam pbr linecard 2 port-set 0
Src
Dst
Flag
Port
Port
TCP
0x10
0
0
The show cam pbr command displays the PBR CAM content. The "VlanID" column displays the
corresponding VLAN ID to which the redirect-group is applied.
ip redirect-group
show ip redirect-list
show cam-usage
interface
Enter the keyword
linecard
Enter the keyword
Range: 0 to 13 for the E1200, 0 to 6 for the E600/E600i, 0 to 5 for the E300
port-set
Enter the keyword
Range: 0 to 1
summary
Enter the keyword
entries.
SrcIp
DstIp
100.55.1.0/24
182.16.1.1/24
Apply a redirect group to an interface.
Display the redirect-list configuration.
Display the CAM usage on ACL, router, or switch.
followed by the name of the interface.
followed the slot number.
followed the port-pipe number.
to view only the total number of CAM
Next-hop
MAC
N/A
Egress
Port
N/A
Advertisement
