Advertisement
Command
History
ip pim bsr-border
c e s
Syntax
Defaults
Command Modes
Command
History
Usage
Information
ip pim bsr-candidate
c e s
Syntax
Parameters
1100
|
PIM-Sparse Mode (PIM-SM)
Version 8.1.1.0
Introduced on E-Series ExaScale
Version 7.8.1.0
Introduced on S-Series
Define the border of PIM domain by filtering inbound and outbound PIM-BSR messages per interface.
ip pim bsr-border
To return to the default value, enter no ip pim bsr-border .
Disabled
INTERFACE
Version 8.1.1.0
Introduced on E-Series ExaScale
Version 7.8.1.0
Introduced on C-Series on port-channels and S-Series.
This command is applied to the subsequent PIM-BSR. Existing BSR advertisements are cleaned up by
time out. Candidate RP advertisements can be cleaned using the
Configure the PIM router to join the Bootstrap election process.
ip pim bsr-candidate interface [hash-mask-length] [priority]
To return to the default value, enter no ip pim bsr-candidate .
interface
Enter the following keywords and slot/port or number information:
•
•
•
•
•
•
hash-mask-length
(OPTIONAL) Enter the hash mask length.
Range: zero (0) to 32
Default: 30
priority
(OPTIONAL) Enter the priority used in Bootstrap election process.
Range: zero (0) to 255
Default: zero (0)
For a 1-Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
For a Loopback interface, enter the keyword
from 0 to 16383.
For a Port Channel interface, enter the keyword
number:
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512 for
ExaScale.
For a SONET interface, enter the keyword
information.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port information.
For a VLAN, enter the keyword
clear ip pim rp-mapping
GigabitEthernet
loopback
followed by a number
port-channel
sonet
followed by the slot/port
vlan
followed by a number from 1 to 4094.
command.
followed by a
Advertisement
