Advertisement
promiscuous
trunk
Defaults
disabled
Command Modes
INTERFACE
Command
Version 7.8.1.0
History
Usage
The assignment of the various PVLAN port types to port and port channel (LAG) interfaces is
Information
demonstrated below.
Example
Figure 45-6. Examples of switchport mode private-vlan Command
FTOS#conf
FTOS(conf)#interface GigabitEthernet 2/1
FTOS(conf-if-gi-2/1)#switchport mode private-vlan promiscuous
FTOS(conf)#interface GigabitEthernet 2/2
FTOS(conf-if-gi-2/2)#switchport mode private-vlan host
FTOS(conf)#interface GigabitEthernet 2/3
FTOS(conf-if-gi-2/3)#switchport mode private-vlan trunk
FTOS(conf)#interface port-channel 10
FTOS(conf-if-gi-2/3)#switchport mode private-vlan promiscuous
Related
private-vlan mode
Commands
private-vlan mapping
secondary-vlan
show interfaces private-vlan
show vlan private-vlan mapping
promiscuous
Enter
to configure the selected port or port channel as an
promiscuous interface, as described above.
trunk
Enter
to configure the selected port or port channel as a trunk port in a PVLAN,
as described above.
Introduced on C-Series and S-Series
Set the mode of the selected VLAN to either community or isolated.
Set the mode of the selected VLAN to primary and then associate
secondary VLANs to it.
Display type and status of PVLAN interfaces.
Display primary-secondary VLAN mapping.
Private VLAN (PVLAN) | 1163
Advertisement
