Advertisement
vlan max-age
c e s
Syntax
Parameters
Defaults
Command Modes
Command
History
Related
Commands
1178
|
Per-VLAN Spanning Tree plus (PVST+)
Set the time interval for the PVST+ bridge to maintain configuration information before refreshing that
information.
vlan vlan-range max-age seconds
To return to the default, use the no vlan max-age command.
vlan vlan-range
max-age seconds
20 seconds
CONFIGURATION (conf-pvst)
Version 7.6.1.0
Support added for S-Series
Version 7.5.1.0
Support added for C-Series
Version 6.2.1.1
Introduced
vlan bridge-priority
vlan forward-delay
vlan hello-time
show spanning-tree pvst
vlan
Enter the keyword
followed by the VLAN number(s).
Range: 1 to 4094
max-age
Enter the keyword
FTOS waits before refreshing configuration information.
Range: 6 to 40 seconds
Default: 20 seconds
Set the bridge-priority value
Change the time interval before FTOS transitions to the forwarding state
Change the time interval between BPDUs
Display the PVST+ configuration
followed by the time interval, in seconds, that
Advertisement
