Advertisement
access-list-name
ipv6
access-list-name
access-list-name
ipv6
access-list-name
Defaults
As above
Command Modes
CONFIGURATION
Command
Version 7.6.1.0
History
Version 7.5.1.0
E-Series legacy command
Usage
Information
No default values exist for authentication or privacy algorithms and no default password exist. If you
forget a password, you cannot recover it; the user must be reconfigured. You can specify either a
plain-text password or an encrypted cypher-text password. In either case, the password will be stored
in the configuration in an encrypted form and displayed as encrypted in the
command.
If you have an encrypted password, you can specify the encrypted string instead of the plain-text
password. The following command is an example of how to specify the command with an encrypted
string:
Examples
Figure 54-9. snmp-server user Command Example
FTOS# snmp-server user privuser v3group v3 encrypted auth md5
9fc53d9d908118b2804fe80e3ba8763d priv des56 d0452401a8c3ce42804fe80e3ba8763d
The following command is an example of how to enter a plain-text password as the string
authpasswd for user authuser of group v3group.
FTOS#conf
FTOS(conf)# snmp-server user authuser v3group v3 auth md5 authpasswd
The following command configures a remote user named n3user with a v3 security model and a
security level of authNOPriv.
FTOS#conf
FTOS(conf)# snmp-server user n3user ngroup remote 172.31.1.3 udp-port 5009 3 auth
md5 authpasswd
Related
show snmp user
Commands
(Optional) Enter the standard IPv4 access list name (a string up to 16 characters
long).
(Optional) Enter the keyword
string up to 16 characters long)
(Optional) Enter both an IPv4 and IPv6 access list name.
Support added for S-Series
Support added for C-Series
Note:
For IPv6 ACLs, only IPv6 and UDP types are valid for SNMP; TCP, ICMP rules are
not valid for SNMP. In IPv6 ACLs port rules are not valid for SNMP.
Note:
The number of configurable users is limited to 16.
Display the information configured on each SNMP user name
ipv6
followed by the IPv6 access list name (a
show running-config
.
SNMP and Syslog | 1369
Advertisement
