Advertisement
Example 2
Figure 41-17. show ipv6 pim rp mapping Command Example
FTOS#show ipv6 pim rp mapping
PIM Group-to-RP Mappings
Group(s): ff00::/8
Group(s): ff00::/8, Static
FTOS#
show ipv6 pim tib
e
View the IPv6 PIM multicast-routing database (tree information base—tib).
Syntax
show ipv6 pim tib [group-address [source-address]]
Parameters
group-address
source-address
Command Modes
EXEC
EXEC Privilege
Command
Version 7.4.1.0
History
Example
Figure 41-18. show ipv6 pim tib Command Example
FTOS#show ipv6 pim tib
PIM Multicast Routing Table
Flags: D - Dense, S - Sparse, C - Connected, L - Local, P - Pruned,
Timers: Uptime/Expires
Interface state: Interface, next-Hop, State/Mode
(25::1, ff0e::225:1:2:1), uptime 00:09:53, expires 00:00:00,flags: CJ
(25::1, ff0e::225:1:2:2), uptime 00:09:54, expires 00:00:00,flags: CJ
(25::2, ff0e::225:1:2:2), uptime 00:09:54, expires 00:00:00,flags: CJ
(25::1, ff0e::226:1:2:1), uptime 00:09:54, expires 00:00:00,flags: CJ
FTOS#
RP: 14::1, v2
Info source: 14::1, via bootstrap, priority 192
Uptime: 00:03:37, expires: 00:01:53
RP: 14::2, v2
(OPTIONAL) Enter the IPv6 group address in the
::
The
notation specifies successive hexadecimal fields of zero
(OPTIONAL) Enter the source address in the
::
The
notation specifies successive hexadecimal fields of zero
Introduced
R - RP-bit set, F - Register flag, T - SPT-bit set, J - Join SPT,
M - MSDP created entry, A - Candidate for MSDP Advertisement
K - Ack-Pending State
RPF neighbor: GigabitEthernet 10/3, fe80::201:e8ff:fe00:6265
Outgoing interface list:
GigabitEthernet 10/11
RPF neighbor: GigabitEthernet 10/3, fe80::201:e8ff:fe00:6265
Outgoing interface list:
GigabitEthernet 10/11
RPF neighbor: GigabitEthernet 10/3, fe80::201:e8ff:fe00:6265
Outgoing interface list:
GigabitEthernet 10/11
RPF neighbor: GigabitEthernet 10/3, fe80::201:e8ff:fe00:6265
Outgoing interface list:
GigabitEthernet 10/11
x:x:x:x::x
format.
x:x:x:x::x
format.
PIM-Sparse Mode (PIM-SM) | 1129
Advertisement
