Advertisement
logging buffered
c e s
Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
Related
Commands
logging console
c e s
Syntax
Parameters
Defaults
Command Modes
1374
|
SNMP and Syslog
Enable logging and specify which messages are logged to an internal buffer. By default, all messages
are logged to the internal buffer.
logging buffered [level] [size]
To return to the default values, enter default logging buffered. To disable logging stored to an
internal buffer, enter no logging buffered.
level
size
level = 7; size = 40960 bytes
CONFIGURATION
Version 7.6.1.0
Support added for S-Series
Version 7.5.1.0
Support added for C-Series
E-Series legacy command
When you decrease the buffer size, all messages stored in the buffer are lost. Increasing the buffer size
does not affect messages stored in the buffer.
clear logging
default logging buffered
show logging
Specify which messages are logged to the console.
logging console [level]
To return to the default values, enter
no logging console.
level
(OPTIONAL) Indicate a value from 0 to 7 or enter one of the following parameters: emergencies,
alerts, critical, errors, warnings, notifications, informational, or debugging.
Default: 7 or debugging.
7 or debugging
CONFIGURATION
(OPTIONAL) Indicate a value from 0 to 7 or enter one of the following
equivalent words: emergencies, alerts, critical, errors, warnings, notifications,
informational, or debugging.
Default: 7 or debugging.
(OPTIONAL) Indicate the size, in bytes, of the logging buffer. The number of
messages buffered depends on the size of each message.
Range: 40960 to 524288.
Default: 40960 bytes.
Clear the logging buffer.
Returns the logging buffered parameters to the default setting.
Display the logging setting and system messages in the internal buffer.
default logging
console. To disable logging to the console, enter
Advertisement
