Advertisement
Command Modes
ROUTER OSPF
Command
Version 7.8.1.0
History
Version 7.6.1.0
Version 7.5.1.0
pre-Version 6.1.1.1
Usage
o specify a distance for routes learned from other routing domains, use the
T
Information
distribute-list in
c e s
Apply a filter to incoming routing updates from OSPF to the routing table.
Syntax
distribute-list prefix-list-name in [interface]
To delete a filter, use the no distribute-list prefix-list-name in [interface] command.
Parameters
prefix-list-name
interface
Defaults
Not configured.
Command Modes
ROUTER OSPF
Command
Version 7.8.1.0
History
Version 7.6.1.0
Version 7.5.1.0
pre-Version 6.1.1.1
Introduced support for Multi-Process OSPF.
Introduced on S-Series
Introduced on C-Series
Introduced on E-Series
Enter the name of a configured prefix list.
(OPTIONAL) Enter one of the following keywords and slot/port or number
information:
•
For a 1-Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
•
For a Port Channel interface, enter the keyword
number:
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512 for
ExaScale.
•
For a SONET interface, enter the keyword
information.
•
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
•
For a VLAN, enter the keyword
Introduced support for Multi-Process OSPF.
Introduced on S-Series
Introduced on C-Series
Introduced on E-Series
redistribute
port-channel
sonet
followed by the slot/port
followed by the slot/port information.
vlan
followed by a number from 1 to 4094.
Open Shortest Path First (OSPFv2 and OSPFv3) | 1017
command.
GigabitEthernet
followed by a
Advertisement
