Download Print this page

Dell Force10 TeraScale E Series Reference Manual page 1032

Ftos command line, ftos 8.4.2.7

Advertisement

redistribute
c e s
Syntax
Parameters
Defaults
1032
|
Open Shortest Path First (OSPFv2 and OSPFv3)
The ABR status for the router is updated.
Save passive-interface interface into the running configuration.
passive-interface default
All present and future OSPF interface are marked as passive.
Any adjacency are explicitly terminated from all OSPF interfaces.
All previous passive-interface interface commands are removed from the running
configuration.
All previous no passive-interface interface commands are removed from the running
configuration.
no passive-interface interface
Remove the interface from the passive list.
The ABR status for the router is updated.
If passive-interface default is specified, then save no passive-interface interface into the
running configuration.
No passive-interface default
Clear everything and revert to the default behavior.
All previously marked passive interfaces are removed.
May update ABR status.
Redistribute information from another routing protocol throughout the OSPF process.
redistribute {connected | rip | static} [metric metric-value | metric-type type-value]
[route-map map-name] [tag tag-value]
To disable redistribution, use the no redistribute {connected | isis | rip | static} command.
connected
rip
static
metric metric-value
metric-type
type-value
map-name
route-map
tag-value
tag
Not configured.
connected
Enter the keyword
on interfaces is redistributed.
rip
Enter the keyword
to specify that RIP routing information is redistributed.
static
Enter the keyword
to specify that information from static routes is
redistributed.
(OPTIONAL) Enter the keyword
Range: 0 (zero) to 16777214.
(OPTIONAL) Enter the keyword
following:
1 = OSPF External type 1
2 = OSPF External type 2
(OPTIONAL) Enter the keyword
route map.
(OPTIONAL) Enter the keyword
Range: 0 to 4294967295
to specify that information from active routes
metric
followed by a number.
metric-type
followed by one of the
route-map
followed by the name of the
tag
followed by a number.

Advertisement

loading