Advertisement
show qos policy-map
c e s
Syntax
Parameters
Defaults
Command Modes
Command
History
Example 1
1212
|
Quality of Service (QoS)
View the QoS policy map information.
show qos policy-map {summary [interface] | detail [interface]}
summary interface
To view a policy map interface summary, enter the keyword
optionally one of the following keywords and slot/port or number information:
•
•
•
•
detail interface
To view a policy map interface in detail, enter the keyword
one of the following keywords and slot/port or number information:
•
•
•
•
No default behavior or values
EXEC
EXEC Privilege
Version 7.6.1.0
Introduced on S-Series
Version 7.5.1.0
Introduced on C-Series
Version 7.4.1.0
E-Series only: Added Trust IPv6 diffserv
Version 6.2.1.1
Introduced on E-Series
Figure 47-10. show qos policy-map detail (IPv4) Command Output
FTOS#show qos policy-map detail gigabitethernet 0/0
Interface GigabitEthernet 4/1
Policy-map-input policy
Trust diffserv
Queue#
Class-map-name
0
-
1
CM1
2
CM2
3
CM3
4
CM4
5
CM5
6
CM6
7
CM7
FTOS#
For a Fast Ethernet interface, enter the keyword
the slot/port information.
For a Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
For a SONET interface, enter the keyword
information.
For a Ten Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port information.
For a Fast Ethernet interface, enter the keyword
the slot/port information.
For a Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
For a SONET interface, enter the keyword
information.
For a Ten Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port information.
Qos-policy-name
q0
q1
q2
q3
q4
q5
q6
q7
summary
and
FastEthernet
followed by
GigabitEthernet
sonet
followed by the slot/port
detail
and optionally
FastEthernet
followed by
GigabitEthernet
sonet
followed by the slot/port
Advertisement
