Advertisement
Example 3
Figure 41-7. show ip pim rp group-address Command Example 3
FTOS#sh ip pim rp 229.1.2.1
Group
229.1.2.1
FTOS#
show ip pim snooping interface
e
Display information on VLAN interfaces with PIM-SM snooping enabled.
x
Syntax
show ip pim snooping interface [vlan vlan-id ]
Parameters
vlan
Command Modes
EXEC
EXEC Privilege
Command
Version 8.4.1.1
History
Example
Figure 41-8. show ip pim snooping interface Command Example
FTOS#show ip pim snooping interface
Interface
Vlan 2
Table 41-3. show ip pim snooping interface Command Example Fields
Field
Interface
Ver/Mode
Nbr Count
DR Prio
DR
RP
165.87.20.4
(OPTIONAL) Enter a VLAN ID to display information about a specified VLAN
vlan-id
configured for PIM-SM snooping. Valid VLAN IDs: 1 to 4094.
Introduced on E-Series ExaScale
Ver
Nbr
Count
v2
3
DR
DR
Prio
1
165.87.32.2
Description
Displays the VLAN interfaces with PIM-SM snooping enabled.
Displays the PIM version number for each VLAN interface with PIM-SM
snooping enabled:
•
v2 = PIM version 2
•
S = PIM Sparse mode
Displays the number of neighbors learned through PIM-SM snooping on
the interface.
Displays the Designated Router priority value configured on the interface
(ip pim dr-priority
command).
Displays the IP address of the Designated Router for that interface.
PIM-Sparse Mode (PIM-SM) | 1113
Advertisement
