Advertisement
wred
e
Designate the WRED profile to yellow or green traffic.
Syntax
wred {yellow | green} profile-name
To remove the WRED drop precedence, use the no wred {yellow | green} [profile-name]
command.
Parameters
yellow
profile-name
Defaults
No default behavior or values
Command Modes
CONFIGURATION (conf-qos-policy-out)
Command
Version 8.2.1.0
History
pre-Version 6.1.1.1
Usage
Use this command to assign drop precedence to green or yellow traffic. If there is no honoring enabled
Information
on the input, all the traffic defaults to green drop precedence.
Related
wred-profile
Commands
trust
wred-profile
e
Create a WRED profile and name that profile.
Syntax
wred-profile wred-profile-name
To remove an existing WRED profile, use the no wred-profile command.
Parameters
wred-profile-name
Defaults
The five pre-defined WRED profiles. When a new profile is configured, the minimum and maximum
threshold defaults to predefined wred_ge_g values
Command Modes
CONFIGURATION
|
green
Enter the keyword
xxx100 maps to yellow.
Enter the keyword
green.
Enter your WRED profile name in character format (16 character
maximum). Or use one of the 5 pre-defined WRED profile names.
Pre-defined Profiles:
wred_drop, wred-ge_y, wred_ge_g, wred_teng_y, wred_teng_
Profile name character limit increased from 16 to 32.
Introduced on E-Series
Create a WRED profile and name that profile
Define the dynamic classification to trust DSCP
Enter your WRED profile name in character format (16 character maximum). Or
use one of the pre-defined WRED profile names. You can configure up to 26
WRED profiles plus the 5 pre-defined profiles, for a total of 31 WRED profiles.
Pre-defined Profiles:
wred_drop, wred-ge_y, wred_ge_g, wred_teng_y, wred_teng_g
yellow
for yellow traffic. DSCP value of xxx110 and
green
for green traffic. DSCP value of xxx010 maps to
Quality of Service (QoS) | 1223
Advertisement
