Advertisement
isis
ospf
static
Defaults
Not configured.
Command Modes
ROUTER RIP
Command
Version 7.8.1.0
History
Version 7.6.1.0
pre-Version 6.2.1.1
Related
ip prefix-list
Commands
ip poison-reverse
c e s
Set the prefix of the RIP routing updates to the RIP infinity value.
Syntax
ip poison-reverse
To disable poison reverse, enter no ip poison-reverse.
Defaults
Disabled.
Command Modes
INTERFACE
Command
Version 7.8.1.0
History
Version 7.6.1.0
pre-Version 6.2.1.1
Related
ip split-horizon
Commands
ip rip receive version
c e s
Set the interface to receive specific versions of RIP. The RIP version you set on the interface overrides
the
Syntax
ip rip receive version [1] [2]
To return to the default, enter no ip rip receive version.
Parameters
1
2
Defaults
RIPv1 and RIPv2.
(OPTIONAL) Enter the keyword
Note:
(OPTIONAL) Enter the keyword
(OPTIONAL) Enter the keyword
Introduced on S-Series
Introduced on C-Series
Introduced on E-Series
Enter the PREFIX-LIST mode and configure a prefix list.
Introduced on S-Series
Introduced on C-Series
Introduced on E-Series
Set RIP routing updates to exclude routing prefixes.
version
command in the ROUTER RIP mode.
(OPTIONAL) Enter the number
(OPTIONAL) Enter the number
isis
This option is only available on E-Series.
ospf
static
1
for RIP version 1.
2
for RIP version 2.
to filter only IS-IS routes.
to filter all OSPF routes.
to filter manually configured routes.
Router Information Protocol (RIP) | 1241
Advertisement
