Advertisement
Parameters
Defaults
Command Modes
Command
History
Example
1084
|
Open Shortest Path First (OSPFv2 and OSPFv3)
interface
No default behavior or values
EXEC
EXEC Privilege
Version 7.8.1.0
Added support for C-Series
Version 7.4.1.0
Introduced
Figure 38-29. show ipv6 ospf neighbor Command Example
FTOS#show ipv6 ospf neighbor gi 9/0
Neighbor ID
Pri
State
63.114.8.36
1
FTOS#
(OPTIONAL) Enter the following keywords and slot/port or number
information:
•
For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
•
For a Port Channel interface, enter the keyword
followed by a number:
C-Series Range: 1-128
E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to
512 for ExaScale.
•
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
•
For a VLAN, enter the keyword
range is from 1 to 4094.
Dead Time Interface ID Interface
FULL/DR
00:00:38
port-channel
followed by the slot/port information.
vlan
followed by the VLAN ID. The
4
Gi 9/0
Advertisement
