Advertisement
source (remote port mirroring)
e
x
Syntax
Parameters
Defaults
1150
|
Port Monitoring
Configure one or more source ports, the ingress/egress traffic to be mirrored, and the reserved L2
VLAN used to transport mirrored traffic.
source {single-interface | vlan vlan-id | range {interface-list | interface-range |
mixed-interface-list | vlan-list | vlan-range | mixed-vlan-list}} destination remote vlan vlan-id
direction {rx | tx | both}
single-interface
vlan vlan-id
range interface-list
range interface-range
range mixed-interface-list
range vlan-list
range vlan-range
range mixed-vlan-list
destination remote-vlan
vlan-id
direction {rx | tx | both}
No default behavior or values
Specifies one of the following interface types:
•
1-Gigabit Ethernet: Enter gigabitethernet slot/port.
•
10-Gigabit Ethernet: Enter tengigabitethernet slot/port.
•
Port channel: Enter port-channel {1-511}.
Specifies a single VLAN ID. Range: 1-4094
Specifies multiple interfaces separated by a comma and space:
single-interface, single-interface, single-interface...
For example: source range port-channel 2,
gigabitethernet 3/4
Specifies one of the following interface ranges:
•
gigabitethernet slot/first_port - last_port
•
tengigabitethernet slot/first_port - last_port
•
port-channel first_number - last_number
A space is required before and after the dash (-).
For example: source range gigabitethernet 1/2 - 4
Or: source range port-channel 1 - 12
Specifies single interfaces and interface ranges in any order: range
single-interface, interface-range, single-interface...
For example: source range port-channel 2,
gigabitethernet 3/4 - 5
Specifies multiple source VLANs separated by a comma and space:
range vlan
vlan
vlan-id,
vlan-id,
For example: source range vlan 2, vlan 12, vlan 22
Specifies a range of source VLANs in the format:
.
first_vlanID - last_vlanID
A space is required before and after the dash (-).
For example: source range vlan 9-11
Specifies single VLANs and VLAN ranges in any order: range vlan
vlan first_vlanID - last_vlanID
vlan-id,
For example: source range vlan 2, vlan 10 - 11, vlan
5
Associates the reserved L2 VLAN with the source ports used in the
source session. Valid VLAN IDs are 1 to 4094. The default VLAN ID is
not supported.
Specifies the direction of the traffic to be mirrored:
rx
: incoming packets only
tx
: outgoing packets only
both
: both incoming and outgoing packets
vlan
vlan-id...
range vlan
, vlan vlan-id...
Advertisement
