Advertisement
Table 41-1. show ip pim interface Command Example Fields
Field
Address
Interface
Ver/Mode
Nbr Count
Query Intvl
DR Prio
DR
show ip pim neighbor
c e s
View PIM neighbors.
Syntax
show ip pim neighbor
Command Modes
EXEC
EXEC Privilege
Command
Version 8.1.1.0
History
Version 7.8.1.0
Example
Figure 41-4. show ip pim neighbor Command Example
FTOS#show ip pim neighbor
Neighbor
Address
127.87.3.4
FTOS#
Table 41-2. show ip pim neighbor Command Example Fields
Field
Neighbor address
Interface
Uptime/expires
Description
Lists the IP addresses of the interfaces participating in PIM.
List the interface type, with either slot/port information or ID (VLAN or
Port Channel), of the interfaces participating in PIM.
Displays the PIM version number and mode for each interface
participating in PIM.
•
v2 = PIM version 2
•
S = PIM Sparse mode
Displays the number of PIM neighbors discovered over this interface.
Displays the query interval for Router Query messages on that interface
(configured with
ip pim query-interval
Displays the Designated Router priority value configured on the interface
(ip pim dr-priority
Displays the IP address of the Designated Router for that interface.
Introduced on E-Series ExaScale
Introduced on S-Series
Interface
Uptime/Expires
Gi 7/16
09:44:58/00:01:24
Description
Displays the IP address of the PIM neighbor.
List the interface type, with either slot/port information or ID (VLAN or
Port Channel), on which the PIM neighbor was found.
Displays the amount of time the neighbor has been up followed by the
amount of time until the neighbor is removed from the multicast routing
table (that is, until the neighbor hold time expires).
command).
command).
Ver
DR
Prio/Mode
v2
1
/ S
PIM-Sparse Mode (PIM-SM) | 1111
Advertisement
