Advertisement
logging trap
c e s
Syntax
Parameters
Defaults
Command Modes
Command
History
Related
Commands
show logging
c e s
Syntax
Parameters
Command Modes
1380
|
SNMP and Syslog
Specify which messages are logged to the Syslog server based the message severity.
logging trap [level]
To return to the default values, enter default logging trap. To disable logging, enter no logging
trap.
level
Indicate a value from 0 to 7 or enter one of the following parameters: emergencies, alerts,
critical, errors, warnings, notifications, informational, or debugging.
The default is 6.
6 or informational
CONFIGURATION
Version 7.6.1.0
Support added for S-Series
Version 7.5.1.0
Support added for C-Series
E-Series legacy command
logging
Enable the logging to another device.
logging on
Enables logging.
Display the logging settings and system messages logged to the internal buffer of the switch.
show logging [number | history [reverse] [number] | reverse [number] | summary]
number
(OPTIONAL) Enter the number of message to be displayed on the output.
Range: 1 to 65535
history
(OPTIONAL) Enter the keyword
table.
reverse
(OPTIONAL) Enter the keyword
first out) order.
summary
(OPTIONAL) Enter the keyword
messages per type and per slot.
Slots *7* and *8* represent RPMs.
EXEC
EXEC Privilege
history
to view only information in the Syslog history
reverse
to view the Syslog messages in FIFO (first in,
summary
to view a table showing the number of
Advertisement
