Advertisement
Table 38-14. Command Example Descriptions: show ip ospf process-id virtual-links
Items
"Virtual Link..."
"Run as..."
"Transit area..."
"Transmit Delay..."
"Timer intervals..."
"Hello due..."
"Adjacency State..."
summary-address
c e s
Set the OSPF ASBR to advertise one external route.
Syntax
summary-address ip-address mask [not-advertise] [tag tag-value]
To disable summary address, use the no summary-address ip-address mask command.
Parameters
ip-address
mask
not-advertise
tag tag-value
Defaults
Not configured.
Command Modes
ROUTER OSPF
Command
Version 7.8.1.0
History
Version 7.6.1.0
Version 7.5.1.0
pre-Version 6.1.1.1
Usage
If you are using Multi-Process OSPF, you must enter the Process ID to view information regarding a
Information
specific OSPF process. If you do not enter the Process ID, only the first configured process is listed.
The command
Description
This line specifies the OSPF neighbor to which the virtual link was created
and the link's status.
This line states the nature of the virtual link.
This line identifies the area through which the virtual link was created, the
interface used, and the cost assigned to that link.
This line displays the transmit delay assigned to the link and the State of
the OSPF neighbor.
This line displays the timer values assigned to the virtual link. The timers
are Hello is hello-interval, Dead is dead-interval, Wait is transmit-delay,
and Retransmit is retransmit-interval.
This line displays the amount of time until the next Hello packet is
expected from the neighbor router.
This line displays the adjacency state between neighbors.
Specify the IP address in dotted decimal format of the address to be summarized.
Specify the mask in dotted decimal format of the address to be summarized.
(OPTIONAL) Enter the keyword
network prefix/mask pair.
(OPTIONAL) Enter the keyword
redistributed through a route map.
Range: 0 to 4294967295
Introduced support of Multi-Process OSPF.
Introduced on S-Series
Introduced on C-Series
Introduced on E-Series
area range
summarizes routes for the different areas.
not-advertise
to suppress that match the
tag
followed by a value to match on routes
Open Shortest Path First (OSPFv2 and OSPFv3) | 1061
Advertisement
