Advertisement
distribute-list out
c e s
Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
enable inverse mask
c e
Syntax
Defaults
Command Modes
Command
History
1018
|
Open Shortest Path First (OSPFv2 and OSPFv3)
Apply a filter to restrict certain routes destined for the local routing table after the SPF calculation.
distribute-list prefix-list-name out [bgp | connected | isis | rip | static]
To remove a filter, use the no distribute-list prefix-list-name out [bgp | connected | isis | rip |
static] command.
prefix-list-name
Enter the name of a configured prefix list.
bgp
(OPTIONAL) Enter the keyword
connected
(OPTIONAL) Enter the keyword
distributed.
isis
(OPTIONAL) Enter the keyword
rip
(OPTIONAL) Enter the keyword
static
(OPTIONAL) Enter the keyword
routes are distributed.
* BGP and ISIS routes are not available on the C-Series.
BGP, ISIS, and RIP routes are not available on the S-Series.
Not configured.
ROUTER OSPF
Version 7.8.1.0
Introduced support for Multi-Process OSPF.
Version 7.6.1.0
Introduced on S-Series
Version 7.5.1.0
Introduced on C-Series
pre-Version 6.1.1.1
Introduced on E-Series
The
distribute-list out
command applies to routes being redistributed by autonomous system boundary
routers (ASBRs) into OSPF. It can be applied to external type 2 and external type 1 routes, but not to
intra-area and inter-area routes.
FTOS, by default, permits the user to input OSPF network command with a net-mask. This command
provides a choice between inverse-mask or net-mask (the default).
enable inverse mask
To return to the default net-mask, enter no enable inverse mask.
net-mask
CONFIGURATION
Version 7.5.1.0
pre-Version 6.1.1.1
bgp
connected
isis
rip
to specify that RIP routes are distributed.*
static
Introduced on C-Series
Introduced on E-Series
to specify that BGP routes are distributed.*
to specify that connected routes are
to specify that IS-IS routes are distributed.*
to specify that only manually configured
Advertisement
