Advertisement
Usage
Information
Related
Commands
service-policy output
c e s
Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
Related
Commands
service-queue
c e s
Syntax
1206
|
Quality of Service (QoS)
A single policy-map can be attached to one or more interfaces to specify the service-policy for those
interfaces. A policy map attached to an interface can be modified.
Note:
The service-policy commands are not allowed on a port channel.
service-policy input policy-map-name
The
dot1p
command are not allowed simultaneously on an interface. However, the
input
command (without the
dot1p
command are allowed on an interface.
policy-map-input
Apply an output policy map to the selected interface.
service-policy output policy-map-name
To remove the output policy map from the interface, use the no service-policy output
policy-map-name command.
policy-map-name
No default behavior or values
INTERFACE
Version 7.6.1.0
Introduced on C-Series and S-Series
pre-Version 6.1.1.1
Introduced on E-Series
A single policy-map can be attached to one or more interfaces to specify the service-policy for those
interfaces. A policy map attached to an interface can be modified.
policy-map-output
Assign a class map and QoS policy to different queues.
service-queue queue-id [class-map class-map-name] [qos-policy qos-policy-name]
To remove the queue assignment, use the no service-queue queue-id [class-map
class-map-name] [qos-policy qos-policy-name] command.
command and the
policy-map-name
option) and the
Create an input policy map.
Enter the name for the policy map in character format (16 characters
You can identify an existing
maximum).
exist.
does not yet
Create an output policy map.
service-class dynamic
service-policy
service-class dynamic
policy map or name one that
Advertisement
