Advertisement
vlan hello-time
c e s
Set the time interval between generation of PVST+ Bridge Protocol Data Units (BPDUs).
Syntax
vlan vlan-range hello-time seconds
To return to the default value, enter no vlan hello-time command.
Parameters
vlan vlan-range
hello-time seconds
Defaults
2 seconds
Command Modes
CONFIGURATION (conf-pvst)
Command
Version 7.6.1.0
History
Version 7.5.1.0
Version 6.2.1.1
Related
vlan bridge-priority
Commands
vlan forward-delay
vlan max-age
show spanning-tree pvst
Enter the keyword
Range: 1 to 4094
Enter the keyword
between transmission of BPDUs.
Range: 1 to 10 seconds
Default: 2 seconds
Support added for S-Series
Support added for C-Series
Introduced
Set the bridge-priority value
Change the time interval before FTOS transitions to the forwarding state
Change the time interval before PVST+ refreshes
Display the PVST+ configuration
vlan
followed by the VLAN number(s).
hello-time
followed by the time interval, in seconds,
Per-VLAN Spanning Tree plus (PVST+) | 1177
Advertisement
