Advertisement
Command
Version 7.6.1.0
History
Version 7.5.1.0
Version 6.1.1.0
rmon collection history
c e s
Enable the RMON MIB history group of statistics collection on an interface.
Syntax
rmon collection history {controlEntry integer} [owner name] [buckets number] [interval
seconds]
To remove a specified RMON history group of statistics collection, use the no rmon collection
history {controlEntry integer} command.
Parameters
controlEntry integer
owner name
buckets number
interval seconds
Defaults
No default behavior
Command Modes
CONFIGURATION INTERFACE (config-if)
Command
Version 7.6.1.0
History
Version 7.5.1.0
Version 6.1.1.0
rmon collection statistics
c e s
Enable RMON MIB statistics collection on an interface.
Syntax
rmon collection statistics {controlEntry integer} [owner name]
To remove RMON MIB statistics collection on an interface, use the no rmon collection statistics
{controlEntry integer} command.
Support added for S-Series
Support added for C-Series
Introduced for E-Series
Enter the keyword
using a value. Then enter an integer value from 1 to 65535 that identifies the
RMON group of statistics. The integer value must be a unique index in the
RMON History Table.
(OPTIONAL) Enter the keyword
record the owner of the RMON group of statistics.
(OPTIONAL) Enter the keyword
for the RMON collection history group of statistics.
Bucket Range: 1 to 1000
Default: 50
(OPTIONAL) Enter the keyword
in each polling cycle.
Range: 5 to 3600 seconds
Default: 1800 seconds
Support added for S-Series
Support added for C-Series
Introduced for E-Series
controlEntry
to specify the RMON group of statistics
owner
followed by the owner name to
buckets
followed the number of buckets
interval
followed the number of seconds
Remote Monitoring (RMON) | 1255
Advertisement
