Advertisement
Command Modes
EXEC Privilege
Command
Version 7.8.1.0
History
Version 7.6.1.0
Version 7.5.1.0
pre-Version 6.1.1.1
Example
Figure 38-1. Command example: debug ip ospf process-id packet
FTOS#debug ip ospf 1 packet
OSPF process 90, packet debugging is on
FTOS#
08:14:24 : OSPF(100:00):
Xmt. v:2 t:1(HELLO) l:44 rid:192.1.1.1
Table 38-1. Output Descriptions for debug ip ospf process-id packet
Field
8:14
OSPF
v:
t:
l:
rid:
aid:
chk:
aut:
auk:
keyid:
to:
dst:
netmask:
pri:
Introduced support for Multi-Process OSPF.
Introduced on S-Series
Introduced on C-Series
Introduced on E-Series
aid:0.0.0.1 chk:0xa098 aut:0 auk: keyid:0 to:Gi 4/3 dst:224.0.0.5
netmask:255.255.255.0 pri:1 N-, MC-, E+, T-,
hi:10 di:40 dr:90.1.1.1 bdr:0.0.0.0
Description
Displays the time stamp.
Displays the OSPF process ID: instance ID.
Displays the OSPF version. FTOS supports version 2 only.
Displays the type of packet sent:
•
1 - Hello packet
•
2 - database description
•
3 - link state request
•
4 - link state update
•
5 - link state acknowledgement
Displays the packet length.
Displays the OSPF router ID.
Displays the Autonomous System ID.
Displays the OSPF checksum.
States if OSPF authentication is configured. One of the following is listed:
•
0 - no authentication configured
•
1 - simple authentication configured using the
•
2 - MD5 authentication configured using the
If the
ip ospf authentication-key
If the
ip ospf message-digest-key
Displays the interface to which the packet is intended.
Displays the destination IP address.
Displays the destination IP address mask.
Displays the OSPF priority
ip ospf authentication-key
ip ospf message-digest-key
command is configured, this field displays the key used.
command is configured, this field displays the MD5 key
Open Shortest Path First (OSPFv2 and OSPFv3) | 1013
command)
command.
Advertisement
