Advertisement
show ip pim snooping neighbor
e
x
Syntax
Parameters
Command Modes
Command
History
Example
1114
|
PIM-Sparse Mode (PIM-SM)
Display information on PIM neighbors learned through PIM-SM snooping.
show ip pim snooping neighbor [vlan vlan-id ]
vlan
vlan-id
(OPTIONAL) Enter a VLAN ID to display information about PIM neighbors that was
discovered by PIM-SM snooping on a specified VLAN.
Valid VLAN IDs: 1 to 4094.
EXEC
EXEC Privilege
Version 8.4.1.1
Figure 41-9. show ip pim snooping neighbor Command Example
FTOS#show ip pim snooping neighbor
Neighbor
Address
165.87.32.2
165.87.32.10
165.87.32.12
Table 41-4. show ip pim snooping neighbor Command Example Fields
Field
Neighbor address
Interface
Uptime/expires
Ver
DR prio/Mode
Introduced on E-Series ExaScale
Interface
Uptime/Expires
Vl 2 [Gi 4/13 ]
00:04:03/00:01:42
Vl 2 [Gi 4/11 ]
00:00:46/00:01:29
Vl 2 [Gi 4/20 ]
00:00:51/00:01:24
Description
Displays the IP address of the neighbor learned through PIM-SM
snooping.
Displays the VLAN ID number and slot/port on which the
PIM-SM-enabled neighbor was discovered.
Displays the amount of time the neighbor has been up followed by the
amount of time until the neighbor is removed from the multicast routing
table (that is, until the neighbor hold time expires).
Displays the PIM version number.
•
v2 = PIM version 2
Displays the Designated Router priority and the mode.
•
1 = default Designated Router priority (use
•
DR = Designated Router
•
S = Sparse mode
Ver
DR Prio
v2
1
v2
0
v2
0
ip pim
dr-priority)
Advertisement
