Advertisement
Command
Version 7.6.1.0
History
Version 7.5.1.0
pre-Version 6.1.1.0
Usage
To configure the switch as a SCP server, use the
Information
Related
ip ssh server
Commands
ip ssh authentication-retries
c e s
Configure the maximum number of attempts that should be used to authenticate a user.
Syntax
ip ssh authentication-retries 1-10
Parameters
1-10
Defaults
3
Command Modes
CONFIGURATION
Command
Version 7.6.1.0
History
Version 7.5.1.0
pre-Version 6.1.1.0
Usage
This command specifies the maximum number of attempts to authenticate a user on a SSH connection
Information
with the remote host for password authentication. SSH will disconnect when the number of password
failures exceeds authentication-retries.
ip ssh connection-rate-limit
c e s
Configure the maximum number of incoming SSH connections per minute.
Syntax
ip ssh connection-rate-limit 1-10
Parameters
1-10
Defaults
10 per minute
Command Modes
CONFIGURATION
Introduced for S-Series
Introduced for C-Series
Introduced for E-Series
ip ssh server
Enable SSH and SCP server on the switch.
Enter the number of maximum retries to authenticate a user.
Range: 1 to 10
Default: 3
Introduced for S-Series
Introduced for C-Series
Introduced for E-Series
Enter the number of maximum number of incoming SSH connections allowed per
minute.
Range: 1 to 10 per minute
Default: 10 per minute
command.
Security | 1313
Advertisement
