Advertisement
privilege level (CONFIGURATION mode)
c e s
Change the access or privilege level of one or more commands.
Syntax
privilege mode {level level | reset}
To delete access to a level and command, use the no privilege mode level level command.
Parameters
mode
level level
reset
command
Defaults
Not configured.
Command Modes
CONFIGURATION
Command
Version 7.6.1.0
History
Version 7.5.1.0
pre-Version 6.1.1.0
Usage
Use the
Information
privilege or access.
privilege level (LINE mode)
c e s
Change the access level for users on the terminal lines.
Syntax
privilege level level
To delete access to a terminal line, use the no privilege level level command.
Parameters
level level
Defaults
level = 15
Command Modes
LINE
Enter one of the following keywords as the mode for which you are controlling access:
configure
•
exec
•
for the EXEC mode
interface
•
for the INTERFACE modes
line
•
for the LINE mode
route-map
•
router
•
for the ROUTER OSPF, ROUTER RIP, ROUTER ISIS and ROUTER BGP
modes.
Enter the keyword
Range: 0 to 15.
Level 1 is the EXEC mode and Level 15 allows access to all CLI modes and commands.
Enter the keyword
Enter the command's keywords to assign the command to a certain access level. You can
enter one or all of the keywords
Introduced for S-Series
Introduced for C-Series
Introduced for E-Series
enable password
command to define a password for the level to which you are assigning
Enter the keyword
Range: 0 to 15.
Level 1 is the EXEC mode and Level 15 allows access to all CLI modes.
for the CONFIGURATION mode
for the ROUTE-MAP
level
followed by a number for the access level.
reset
to return the security level to the default setting.
level
followed by a number for the access level.
Security | 1283
Advertisement
