Advertisement
redistribute isis
c e s
Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
router-id
c e s
Syntax
Parameters
1034
|
Open Shortest Path First (OSPFv2 and OSPFv3)
Redistribute IS-IS routing information throughout the OSPF instance.
redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric metric-value | metric-type
type-value] [route-map map-name] [tag tag-value]
To disable redistribution, use the no redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric
metric-value | metric-type type-value] [route-map map-name] [tag tag-value] command.
tag
level-1
level-1-2
level-2
metric metric-value
metric-type
type-value
route-map map-name
tag tag-value
Not configured.
ROUTER OSPF
Version 7.8.1.0
Introduced support for Multi-Process OSPF.
Version 7.6.1.0
Introduced on S-Series
Version 7.5.1.0
Introduced on C-Series
pre-Version 6.1.1.1
Introduced on E-Series
IS-IS is not supported on S-Series platforms.
Use this command to configure a fixed router ID.
router-id ip-address
To remove the fixed router ID, use the no router-id ip-address command.
ip-address
(OPTIONAL) Enter the name of the IS-IS routing process.
(OPTIONAL) Enter the keyword
routes.
(OPTIONAL) Enter the keyword
and Level-2 routes.
(OPTIONAL) Enter the keyword
routes.
(OPTIONAL) Enter the keyword
Range: 0 (zero) to 4294967295.
(OPTIONAL) Enter the keyword
following:
•
1 = for OSPF External type 1
•
2 = for OSPF External type 2
(OPTIONAL) Enter the keyword
route map.
(OPTIONAL) Enter the keyword
Range: 0 to 4294967295
Enter the router ID in the IP address format
level-1
to redistribute only IS-IS Level-1
level-1-2
to redistribute both IS-IS Level-1
level-2
to redistribute only IS-IS Level-2
metric
followed by a number.
metric-type
followed by one of the
route-map
followed by the name of the
tag
followed by a number.
Advertisement
