Advertisement
Related
Commands
show ip ospf database summary
c e s
Syntax
Parameters
1050
|
Open Shortest Path First (OSPFv2 and OSPFv3)
Table 38-8. Command Example Descriptions: show ip ospf process-id database router
Item
LS Age
Options
LS Type
Link State ID
Advertising Router
LS Seq Number
Checksum
Length
Number of Links
Link connected to:
(Link ID)
(Link Data)
Number of TOS Metric
TOS 0 Metric
show ip ospf database
Display the network summary (type 3) LSA routing information.
show ip ospf process-id database summary [link-state-id] [adv-router ip-address]
process-id
Enter the OSPF Process ID to show a specific process.
If no Process ID is entered, command applies only to the first OSPF process.
link-state-id
(OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value depends
on the LSA type, and it can be one of the following:
•
the network's IP address for Type 3 LSAs or Type 5 LSAs
•
the router's OSPF router ID for Type 1 LSAs or Type 4 LSAs
•
the default destination (0.0.0.0) for Type 5 LSAs
adv-router
(OPTIONAL) Enter the keywords
ip-address
information about that router.
Description
Displays the LSA age.
Displays the optional capabilities available on router. The following options can
be found in this item:
•
TOS-capability or No TOS-capability is displayed depending on whether the
router can support Type of Service.
•
DC or No DC is displayed depending on whether the originating router can
support OSPF over demand circuits.
•
E or No E is displayed on whether the originating router can accept AS
External LSAs.
Displays the LSA type.
Displays the Link State ID.
Identifies the router ID of the LSA's originating router.
Displays the link state sequence number. This number detects duplicate or old
LSAs.
Displays the Fletcher checksum of an LSA's complete contents.
Displays the length in bytes of the LSA.
Displays the number of active links to the type of router (Area Border Router or
AS Boundary Router) listed in the previous line.
Identifies the type of network to which the router is connected.
Identifies the link type and address.
Identifies the router interface address.
Lists the number of TOS metrics.
Lists the number of TOS 0 metrics.
Displays OSPF database information.
adv-router
ip-address to display only the LSA
Advertisement
