Advertisement
radius-server retransmit
c e s
Configure the number of times the switch attempts to connect with the configured RADIUS host server
before declaring the RADIUS host server unreachable.
Syntax
radius-server retransmit retries
To configure zero retransmit attempts, enter no radius-server retransmit. To return to the default
setting, enter radius-server retransmit 3.
Parameters
retries
Defaults
3 retries
Command Modes
CONFIGURATION
Command
Version 7.6.1.0
History
Version 7.5.1.0
pre-Version 6.2.1.1
Related
radius-server host
Commands
radius-server timeout
c e s
Configure the amount of time the RADIUS client (the switch) waits for a RADIUS host server to reply
to a request.
Syntax
radius-server timeout seconds
To return to the default value, enter no radius-server timeout.
Parameters
seconds
Defaults
5 seconds
Command Modes
CONFIGURATION
Command
Version 7.6.1.0
History
Version 7.5.1.0
pre-Version 6.2.1.1
Related
radius-server host
Commands
Enter a number of attempts that FTOS tries to locate a RADIUS server.
Range: zero (0) to 100.
Default: 3 retries.
Support added for S-Series
Support added for C-Series
Introduced on E-Series
Configure a RADIUS host.
Enter the number of seconds between an unsuccessful attempt and the FTOS times
out.
Range: zero (0) to 1000 seconds.
Default: 5 seconds.
Support added for S-Series
Support added for C-Series
Introduced on E-Series
Configure a RADIUS host.
Security | 1299
Advertisement
