Advertisement
Usage
Information
Related
Commands
enable restricted
c e s
Syntax
Parameters
Command Modes
Command
History
Usage
Information
enable secret
c e s
Syntax
1288
|
Security
Use this command to define a password for a level and use the
mode)
command to control access to command modes.
Passwords must meet the following criteria:
•
Start with a letter, not a number.
•
Passwords can have a regular expression as the password. To create a password with a regular
expression in it, you must use CNTL + v prior to entering regular expression. For example, to
create the password
abcd]e
do not use the CNTL + v key combination and enter "
Note:
The question mark (?) and the tilde (~) are not supported characters.
show running-config
privilege level (CONFIGURATION mode)
Allows Dell Force10 technical support to access restricted commands.
enable restricted [encryption-type] password
To disallow access to restricted commands, enter no enable restricted.
encryption-type
(OPTIONAL) Enter the number
Enter
password that was already encrypted by a Dell Force10 router.
Use this parameter only with a password that you copied from the
running-config
password
Enter a text string, up to 32 characters long, as the clear text password.
Not configured.
Version 7.6.1.0
Introduced for S-Series
Version 7.5.1.0
Introduced for C-Series
pre-Version 6.1.1.0
Introduced for E-Series
Only Dell Force10 Technical Support staff use this command.
Change the password for the
enable secret [level level] [encryption-type] password
To delete a password, use the no enable secret [encryption-type] password [level level]
command.
, you type "
abcd
CNTL v
View the current configuration.
Control access to command modes within the switch.
7
as the encryption type.
7
followed a text string as the hidden password. The text string must be a
file of another Dell Force10 router.
enable
command.
privilege level (CONFIGURATION
]e
". When the password is created, you
abcd]e
".
show
Advertisement
