Dell Force10 TeraScale E Series Reference Manual page 1413

Parameters
percentage
decimal_value in |
out
wred-profile name
packets_per_second
in
Defaults
No default behavior or values
Command Modes CONFIGURATION (conf)
Command
Version 7.6.1.0
History
Version 7.5.1.0
Version 7.4.1.0
Version 6.5.1.0
Usage Broadcast storm control is valid on Layer 2/Layer 3 interfaces only. Layer 2 broadcast traffic is treated
Information
as unknown-unicast traffic.
storm-control broadcast (Interface)
c e s
Configure the percentage of broadcast traffic allowed on an interface (ingress only).
Syntax storm-control broadcast [percentage decimal_value in] |[wred-profile name]]
[packets_per_second in]
To disable broadcast storm control on the interface, use the no storm-control broadcast
[percentage {decimal_value} in] |[wred-profile name]] [packets_per_second in] command.
Parameters
percentage
decimal_value in
wred-profile name
packets_per_second
in
Defaults
No default behavior or values
E-Series Only: Enter the percentage of broadcast traffic allowed in or out of the
network. Optionally, you can designate a decimal value percentage, for example,
55.5%.
Percentage: 0 to 100
0 % blocks all related traffic
100% allows all traffic into the interface
Decimal Range: 0.1 to 0.9
E-Series Only: (Optionally) Enter the keyword
profile name to designate a wred-profile.
C-Series and S-Series Only: Enter the packets per second of broadcast traffic
allowed into the network.
Range: 0 to 33554431
Introduced on S-Series
Introduced on C-Series
E-Series Only: Added percentage decimal value option
Introduced on E-Series
E-Series Only: Enter the percentage of broadcast traffic allowed in to the
network. Optionally, you can designate a decimal value percentage, for example,
55.5%.
Percentage: 0 to 100
0 % blocks all related traffic
100% allows all traffic into the interface
Decimal Range: 0.1 to 0.9
E-Series Only: (Optionally) Enter the keyword
profile name to designate a wred-profile.
C-Series and S-Series Only: Enter the packets per second of broadcast traffic
allowed into the network.
Range: 0 to 33554431
wred-profile
followed by the
wred-profile
followed by the
Storm Control | 1413