Download Print this page

Dell Force10 TeraScale E Series Reference Manual page 1193

Ftos command line, ftos 8.4.2.7

Advertisement

Related
policy-map-input
Commands
policy-map-output
qos-policy-input
qos-policy-output
wred-profile
match ip dscp
c e s
Use a DSCP (Differentiated Services Code Point) value as a match criteria.
Syntax
match ip dscp dscp-list [[multicast] set-ip-dscp value]
To remove a DSCP value as a match criteria, enter no match ip dscp dscp-list [[multicast]
set-ip-dscp value] command.
Parameters
dscp-list
multicast
set-ip-dscp value
Defaults
No default behavior or values
Command Modes
CLASS-MAP CONFIGURATION (config-class-map)
Command
Version 7.7.1.0
History
Version 7.6.1.0
Version 7.5.1.0
Version 6.2.1.1
You must enter the class-map command in order to access this command. Once the class map is
Usage
Information
identified, you can configure the match criteria.
The match ip dscp and match ip precedence commands are mutually exclusive.
Up to 64 IP DSCP values can be matched in one match statement. For example, to indicate IP DCSP
values 0 1 2 3 4 5 6 7, enter either the command match ip dscp 0,1,2,3,4,5,6,7 or match ip dscp
0-7.
Create an input policy map.
Create an output policy map.
Create an input QOS-policy on the router.
Create an output QOS-policy on the router.
Create a WRED profile.
Enter the IP DSCP value(s) that is to be the match criteria. Separate values by
commas—no spaces ( 1,2,3 ) or indicate a list of values separated by a hyphen
(1-3).
Range: 0 to 63
(OPTIONAL) Enter the keyword
Note: This option is not supported on C-Series or S-Series.
(OPTIONAL) Enter the keyword
The matched traffic will be marked with the DSCP value.
Range: 0 to 63
Note: This option is not supported on S-Series.
Added keyword
Added DSCP Marking option support on S-Series
Introduced on S-Series
Introduced on C-Series
Added support for DSCP Marking option
Introduced on E-Series
Note:
Only one of the IP DSCP values must be a successful match criterion, not all of the
specified IP DSCP values need to match.
multicast
set-ip-dscp
multicast
.
to match against multicast traffic.
followed by the IP DSCP value.
Quality of Service (QoS) | 1193

Advertisement

loading