Advertisement
ip pim ssm-range
c e s
Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
show ip pim ssm-range
c e s
Syntax
Defaults
Command Modes
Command
History
1132
|
PIM-Source Specific Mode (PIM-SSM)
Specify the SSM group range using an access-list.
ip pim ssm-range {access_list_name}
access_list_name
Default SSM range is 232/8 and ff3x/32
CONFIGURATION
Version 8.1.1.0
Introduced on E-Series ExaScale
Version 7.8.1.0
Introduced on S-Series
Version 7.7.1.0
Introduced on C-Series.
Version 7.5.1.0
Introduced on E-Series.
FTOS supports standard access list for the SSM range. Extended ACL cannot be used for configuring
SSM range. If an Extended ACL is configured and then used in the ip pim ssm-range {access list
name} configuration, an error is reported.
However, if ip pim ssm-range {access list name} is configured first and then the ACL is
configured as an Extended ACL, an error is not reported and the ACL is not applied to the SSM range.
FTOS recommended best-practices are to configure the standard ACL, and then apply the ACL to the
SSM range. Once the SSM range is applied, the changes are applied internally without requiring
clearing of the TIB.
When ACL rules change, the ACL and PIM modules apply the new rules automatically.
When SSM range is configured, FTOS supports SSM for configured group range as well as default
SSM range.
When the SSM ACL is removed, PIM SSM is supported for default SSM range only
Display the non-default groups added using the SSM range feature.
show ip pim ssm-range
No default behavior or values
EXEC
EXEC Privilege
Version 8.1.1.0
Introduced on E-Series ExaScale
Version 7.8.1.0
Introduced on S-Series
Enter the name of the access list.
Advertisement
