Download Print this page

Dell Force10 TeraScale E Series Reference Manual page 1207

Ftos command line, ftos 8.4.2.7

Advertisement

Parameters
queue-id
class-map
class-map-name
qos-policy
qos-policy-name
Defaults
No default behavior or values
Command Modes
CONFIGURATION (conf-policy-map-in and conf-policy-map-out)
Command
Version 7.6.1.0
History
Version 7.5.1.0
pre-Version 6.1.1.1
Usage
There are eight (8) queues per interface on the E-Series and four (4) queues per interface on the
Information
C-Series and S-Series. This command assigns a class map or QoS policy to different queues.
Related
class-map
Commands
service-policy input
service-policy output
set
c e s
Mark outgoing traffic with a Differentiated Service Code Point (DSCP) or dot1p value.
Syntax
set {ip-dscp value | mac-dot1p value}
Parameters
ip-dscp value
mac-dot1p value
Defaults
No default behavior or values
Command Modes
CONFIGURATION (conf-qos-policy-in)
Command
Version 8.2.1.0
History
Version 7.6.1.0
Version 7.5.1.0
Enter the value used to identify a queue.
Range: 0 to 7 on E-Series (eight queues per interface), 0-3 on C-Series and
S-Series (four queues per interface; four queues are reserved for control
traffic.)
(OPTIONAL) Enter the keyword
name assigned to the queue in character format (16 character maximum).
Note: This option is available under policy-map-input only.
(OPTIONAL) Enter the keyword
name assigned to the queue in text format (16 characters maximum). This
specifies the input QoS policy assigned to the queue under
and output QoS policy under
Introduced on S-Series
Introduced on C-Series
Introduced on E-Series
Identify the class map.
Apply an input policy map to the selected interface.
Apply an output policy map to the selected interface.
(OPTIONAL) Enter the keyword
Range: 0 to 63
Enter the keyword
Range: 0 to 7
On the C-Series and S-Series allowed values are:0,2,4,6
mac-dot1p available on the C-Series and S-Series
Introduced on S-Series
Introduced on C-Series
class-map
followed by the class map
qos-policy
followed by the QoS policy
policy-map-output
ip-dscp
followed by the IP DSCP value.
mac-dot1p
followed by the dot1p value.
policy-map-input
context.
Quality of Service (QoS) | 1207

Advertisement

loading