Advertisement
Parameters
Defaults
Command Mode
Command
History
radius-server deadtime
c e s
Syntax
Parameters
Defaults
Command Modes
Command
History
1296
|
Security
interface
Enter the following keywords and slot/port or number information:
•
For an 100/1000 Ethernet interface, enter the keyword
by the slot/port information.
•
For a Gigabit Ethernet interface, enter the keyword
the slot/port information.
•
For Loopback interfaces, enter the keyword
zero (0) to 16838.
•
For the Null interface, enter the keywords
•
For a Port Channel interface, enter the keyword
number:
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512 for
ExaScale.
•
For a SONET interface, enter the keyword
information.
•
For a Ten Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
•
For VLAN interface, enter the keyword
Not configured.
CONFIGURATION
Version 7.6.1.0
Support added for S-Series
Version 7.5.1.0
Support added for C-Series
pre-Version 6.2.1.1
Introduced on E-Series
Configure a time interval during which non-responsive RADIUS servers to authentication requests are
skipped.
radius-server deadtime seconds
To disable this function or return to the default value, enter no radius-server deadtime.
seconds
Enter a number of seconds during which non-responsive RADIUS servers are skipped.
Range: 0 to 2147483647 seconds.
Default: 0 seconds.
0 seconds
CONFIGURATION
Version 7.6.1.0
Introduced for S-Series
Version 7.5.1.0
Introduced for C-Series
pre-Version 6.1.1.0
Introduced for E-Series
GigabitEthernet
GigabitEthernet
loopback
followed by a number from
null 0
.
port-channel
followed by a
sonet
followed by the slot/port
TenGigabitEthernet
vlan
followed by a number from 1 to 4094.
followed
followed by
Advertisement
