Download Print this page

Dell Force10 TeraScale E Series Reference Manual page 1041

Ftos command line, ftos 8.4.2.7

Advertisement

Table 38-4. Command Output Descriptions: show ip ospf database asbr-summary
Item
LS Age
Options
LS Type
Link State ID
Advertising Router
Checksum
Length
Network Mask
TOS
Metric
Related
show ip ospf database
Commands
show ip ospf database external
c e s
Display information on the AS external (type 5) LSAs.
Syntax
show ip ospf process-id database external [link-state-id] [adv-router ip-address]
Parameters
process-id
link-state-id
adv-router
ip-address
Command Modes
EXEC
EXEC Privilege
Command
Version 7.8.1.0
History
Version 7.6.1.0
Description
Displays the LSA's age.
Displays the optional capabilities available on router. The following options can be
found in this item:
TOS-capability or No TOS-capability is displayed depending on whether the
router can support Type of Service.
DC or No DC is displayed depending on whether the originating router can
support OSPF over demand circuits.
E or No E is displayed on whether the originating router can accept AS
External LSAs.
Displays the LSA's type.
Displays the Link State ID.
Identifies the advertising router's ID.
Displays the Fletcher checksum of the an LSA's complete contents.
Displays the length in bytes of the LSA.
Displays the network mask implemented on the area.
Displays the Type of Service (TOS) options. Option 0 is the only option.
Displays the LSA metric.
Displays OSPF database information.
Enter the OSPF Process ID to show a specific process.
If no Process ID is entered, command applies only to the first OSPF process.
(OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value depends
on the LSA type, and it can be one of the following:
the network's IP address for Type 3 LSAs or Type 5 LSAs
the router's OSPF router ID for Type 1 LSAs or Type 4 LSAs
the default destination (0.0.0.0) for Type 5 LSAs
(OPTIONAL) Enter the keywords
information about that router.
Introduced support of Multi-Process OSPF.
Introduced on S-Series
adv-router
ip-address to display only the LSA
Open Shortest Path First (OSPFv2 and OSPFv3) | 1041

Advertisement

loading