Advertisement
Defaults
Command Modes
Command
History
Usage
Information
Related
Commands
tacacs-server key
c e s
Syntax
Parameters
Defaults
Command Modes
1302
|
Security
timeout seconds
key key
Not configured.
CONFIGURATION
Version 8.4.1.0
Version 7.7.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version 6.2.1.1
To list multiple TACACS+ servers to be used by the
command multiple times.
If you are not configuring the switch as a TACACS+ server, you do not need to configure the port,
timeout and key optional parameters. If you do not configure a key, the key assigned in the
tacacs-server key
command is used.
aaa authentication login
tacacs-server key
Configure a key for communication between a TACACS+ server and client.
tacacs-server key [encryption-type] key
To delete a key, use the no tacacs-server key key
encryption-type
(OPTIONAL) Enter either zero (0) or 7 as the encryption type for the
The options are:
•
•
key
Enter a text string, up to 42 characters long, as the clear text password.
Leading spaces are ignored.
Not configured.
CONFIGURATION
(OPTIONAL) Enter the keyword
the switch waits for a reply from the TACACS+ server.
Range: 0 to 1000
Default: 10 seconds
(OPTIONAL) Enter the keyword
long as the authentication key. This authentication key must match the key
specified in the
tacacs-server key
Configure this parameter last because leading spaces are ignored.
Added support for IPv6
Authentication key length increased to 42 characters
Introduced for S-Series
Introduced for C-Series
Introduced on E-Series
aaa authentication login
Specify the login authentication method.
Configure a TACACS+ key for the TACACS server.
0 is the default and means the key is not encrypted and stored as clear text.
7 means that the key is encrypted and hidden.
timeout
followed by the number of seconds
key
followed by a string up to 42 characters
for the TACACS+ daemon.
command, configure this
key
entered.
Advertisement
