Advertisement
Parameters
connected
static
Defaults
Not configured.
Command Modes
ROUTER RIP
Command
Version 7.8.1.0
History
Version 7.6.1.0
pre-Version 6.2.1.1
Usage
To redistribute the default route (0.0.0.0/0), configure the
Information
Related
default-information
Commands
originate
redistribute isis
e
Redistribute routing information from an IS-IS instance.
Syntax
redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric metric-value] [route-map
map-name]
To disable redistribution, use the no redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric
metric-value] [route-map map-name] command.
Parameters
tag
level-1
level-1-2
level-2
metric metric-value
route-map map-name
Defaults
Not configured.
Command Modes
ROUTER RIP
Command
pre-Version 6.2.1.1
History
connected
Enter the keyword
interfaces is redistributed.
static
Enter the keyword
to specify that information from static routes is redistributed.
Introduced on S-Series
Introduced on C-Series
Introduced on E-Series
Generate a default route for RIP traffic.
(OPTIONAL) Enter the name of the IS-IS routing process.
(OPTIONAL) Enter the keyword
routes.
(OPTIONAL) Enter the keyword
and Level-2 routes.
(OPTIONAL) Enter the keyword
routes.
(OPTIONAL) Enter the keyword
value.
Range: 0 to16
(OPTIONAL) Enter the keyword
configured route map.
Introduced on E-Series
to specify that information from active routes on
default-information originate
level-1
to redistribute only IS-IS Level-1
level-1-2
to redistribute both IS-IS Level-1
level-2
to redistribute only IS-IS Level-2
metric
followed by a number as the metric
route-map
followed by the name of a
Router Information Protocol (RIP) | 1247
command.
Advertisement
