Advertisement
Example
show running-config rip
c e s
Syntax
Defaults
Command Modes
Example
1250
|
Router Information Protocol (RIP)
Figure 48-3. show ip rip database Command Example (partial)
FTOS#show ip rip database
Total number of routes in RIP database: 1624
204.250.54.0/24
[50/1] via 192.14.1.3, 00:00:12, GigabitEthernet 9/15
204.250.54.0/24
203.250.49.0/24
[50/1] via 192.13.1.3, 00:00:12, GigabitEthernet 9/14
203.250.49.0/24
210.250.40.0/24
[50/2] via 1.1.18.2, 00:00:14, Vlan 18
[50/2] via 1.1.130.2, 00:00:12, Port-channel 30
210.250.40.0/24
207.250.53.0/24
[50/2] via 1.1.120.2, 00:00:55, Port-channel 20
[50/2] via 1.1.130.2, 00:00:12, Port-channel 30
[50/2] via 1.1.10.2, 00:00:18, Vlan 10
207.250.53.0/24
208.250.42.0/24
[50/2] via 1.1.120.2, 00:00:55, Port-channel 20
[50/2] via 1.1.130.2, 00:00:12, Port-channel 30
[50/2] via 1.1.10.2, 00:00:18, Vlan 10
208.250.42.0/24
Table 48-1. Fields in show ip rip database Command Output
Field
Total number of routes in RIP
database
100.10.10.0/24 directly
connected
150.100.0.0 redistributed
209.9.16.0/24...
Use this feature to display the current RIP configuration.
show running-config rip
No default values or behavior
EXEC Privilege
Figure 48-4. show running-config rip Command Example
show running-config rip
!
router rip
distribute-list Test1 in
distribute-list Test21 out
network 10.0.0.0
passive-interface GigabitEthernet 2/0
neighbor 20.20.20.20
redistribute ospf 999
version 2
auto-summary
auto-summary
auto-summary
auto-summary
auto-summary
Description
Displays the number of RIP routes stored in the RIP database.
Lists the route(s) directly connected.
Lists the routes learned through redistribution.
Lists the routes and the sources advertising those routes.
Advertisement
