Advertisement
Example
FTOS(conf-if-range-gi-0/1-48)#do show power inline
Interface
---------
Gi 0/1
Gi 0/2
Table 43-2. show power inline Command Output Field Description
Interface
Admin
Inline Power Allocated
Inline Power Consumed
Class
User Priority
Related
power inline
Commands
power inline priority
show power supply
c s
Display the power supply status.
Syntax
show power supply
Command Modes
EXEC
EXEC Privilege
Command
Version 7.7.1.0
History
Version 7.5.1.0
C-Series
Figure 43-1. show power supply (C-Series) Command Example
Example
FTOS#show power supply
Power
Supply
PEM0
PEM1
PEM2
PEM3
PEM4
PEM5
FTOS#
Admin
Inline Power
Allocated
(Watts)
-----
------------
auto
0.00
auto
7.00
Displays the line card slot and port number.
Displays the PoE mode of the port. The mode can be either auto or static. See
power budget
Displays the amount of power allocated to the port.
Displays the amount of power that is consumed by the connected device.
Displays the power classification of the connected device. Valid classes are
0-4.
Displays the power configured by the user for the port (default is low). See
power inline
Introduced on S-Series
Introduced on C-Series
Model
Number
---------------------------------------------------------------------
CC-C-1200W-AC
CC-C-1200W-AC
CC-C-1200W-AC
Inline Power
Consumed
(Watts)
------------
0.00
3.20
.
priority.
Enable power to be supplied to a device connected to a port.
Set the PoE priority of the selected port
Type
Status
Absent
Absent
AC
Active
Absent
AC
Powered Off
AC
Active
Class
User
Priority
-----
----------
NO_DEVICE
Low
2
Low
Power over Ethernet (PoE) | 1139
Advertisement
