Advertisement
Related
Commands
show snmp engineID
show running-config snmp
snmp-server group
c e s
Configure a new SNMP group or a table that maps SNMP users to SNMP views.
Syntax
snmp-server group [group_name {1 | 2c | 3 {auth | noauth | priv}}] [read name] [write
name] [notify name] [access-list-name | ipv6 access-list-name | access-list-name ipv6
access-list-name]]
To remove a specified group, use the no snmp-server group [group_name {v1 | v2c | v3 {auth
| noauth | priv}}] [read name] [write name] [notify name] [access-list-name | ipv6
access-list-name | access-list-name ipv6 access-list-name]] command.
Parameters
group_name
1
auth
noauth
priv
read name
write name
notify name
access-list-name
ipv6 access-list-name
access-list-name ipv6
access-list-name
|
2c | 3
Display SNMP engine and all remote engines that are configured on the
router
Display the SNMP running configuration
Enter a text string (up to 20 characters long) as the name of the group.
Defaults: The following groups are created for mapping to read/write
community/security-names.
•
v1v2creadg — maps to a community/security-name with
permissions
1v2cwriteg —
•
maps to a community/security-name
permissions
(OPTIONAL) Enter the security model version number (
1
•
is the least secure version
3
•
is the most secure of the security modes.
2c
•
allows transmission of informs and counter 64, which allows for
integers twice the width of what is normally allowed.
1
Default:
(OPTIONAL) Enter the keyword
without encryption.
(OPTIONAL) Enter the keyword
packet.
(OPTIONAL) Enter the keyword
then scrambling of the packet.
(OPTIONAL) Enter the keyword
to 20 characters long) as the read view name.
Default: GlobalView is set by default and is assumed to be every object
belonging to the Internet (1.3.6.1) OID space.
(OPTIONAL) Enter the keyword
to 20 characters long) as the write view name.
(OPTIONAL) Enter the keyword
to 20 characters long) as the notify view name.
(Optional) Enter the standard IPv4 access list name (a string up to 16
characters long).
(Optional) Enter the keyword
string up to 16 characters long)
(Optional) Enter both an IPv4 and IPv6 access list name.
1
,
auth
to specify authentication of a packet
noauth
to specify no authentication of a
priv
to specify both authentication and
read
followed by a name (a string of up
write
followed by a name (a string of up
notify
followed by a name (a string of up
ipv6
followed by the IPv6 access list name (a
SNMP and Syslog | 1363
ro
rw
2c
3)
, or
.
Advertisement
