Advertisement
byte
log
Defaults
Not configured.
Command Modes
TRACE LIST
Command
Version 7.4.1.0
History
Related
deny
Commands
permit
show config
e
View the current IP trace list configuration.
Syntax
show config
Command Modes
TRACE LIST
Example
Figure 51-16. show config Command Example in TRACE LIST Mode
FTOS(config-trace-acl)#show config
!
ip trace-list suzanne
FTOS(config-trace-acl)#
show ip accounting trace-lists
e
View the trace lists created on the switch and the sequence of filters.
Syntax
show ip accounting trace-lists [trace-list-name [linecard number]]
Parameters
trace-list-name
linecard number
Command Modes
EXEC
EXEC Privilege
Command
Version 7.6.1.0
History
Version 7.5.1.0
seq 5 deny tcp any any
(OPTIONAL) Enter the name of the trace list to be displayed.
(OPTIONAL) Enter the keyword
view the Trace list information on that line card.
C-Series and S-Series Range: 0-7on the C300
E-Series Range: 0 to 13 on a E1200, 0 to 6 on a E600, and 0 to 5 on a E300.
Support added for S-Series
Support added for C-Series
(OPTIONAL) Enter the keyword
the filter.
(OPTIONAL) Enter the keyword
Trace-list log file.
established
Deprecated
keyword—not supported on TeraScale line
cards.
Configure a filter to drop packets.
Configure a filter to forward packets.
linecard
byte
to count only bytes processed by
log
to have the information kept in a
followed by the line card number to
Security | 1331
Advertisement
