Table 41-6. show ip pim tib Command Example Fields (continued)
Field
flags
Incoming interface
RPF neighbor
Outgoing interface list:
show running-config pim
e
Display the current configuration of PIM-SM snooping.
x
show running-config pim
Syntax
Command Modes
EXEC Privilege
Command
Version 8.4.1.0
History
Related
ip pim snooping
Commands
Example
Command Example: show running-config pim
FTOS#show running-config pim
!
ip pim snooping enable
Description
List the flags to define the entries:
•
D = PIM Dense Mode
•
S = PIM Sparse Mode
•
C = directly connected
•
L = local to the multicast group
•
P = route was pruned
•
R = the forwarding entry is pointing toward the RP
•
F = FTOS is registering this entry for a multicast source
•
T = packets were received via Shortest Tree Path
•
J = first packet from the last hop router is received and the entry is
ready to switch to SPT
•
K = acknowledge pending state
Displays the reverse path forwarding (RPF) interface towards the RP/
source.
Displays the next hop from this interface towards the RP/source.
Lists the interfaces that meet one of the following criteria:
•
a directly connect member of the Group.
•
statically configured member of the Group.
•
received a (*,G) Join message.
Introduced on E-Series ExaScale.
Enable PIM-SM snooping.
PIM-Sparse Mode (PIM-SM) | 1119