Advertisement
Parameters
interface
Defaults
Not configured.
Command Mode
CONFIGURATION
Command
Version 7.6.1.0
History
Version 7.5.1.0
pre-Version 6.2.1.1
tacacs-server host
c e s
Specify a TACACS+ host.
Syntax
tacacs-server host {hostname | ipv4-address | ipv6-address} [port number] [timeout
seconds] [key key]
Parameters
hostname
ipv4-address |
ipv6-address
port number
Enter the following keywords and slot/port or number information:
•
For an 100/1000 Ethernet interface, enter the keyword
followed by the slot/port information.
•
For a Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
•
For Loopback interfaces, enter the keyword
from zero (0) to 16838.
•
For the Null interface, enter the keywords
•
For a Port Channel interface, enter the keyword
number:
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512 for
ExaScale.
•
For a SONET interface, enter the keyword
information.
•
For a Ten Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
•
For VLAN interface, enter the keyword
4094.
Introduced for S-Series
Introduced for C-Series
Introduced on E-Series
Enter the name of the TACACS+ server host.
Enter the IPv4 address (A.B.C.D) or IPv6 address (X:X:X:X::X), of the
TACACS+ server host.
(OPTIONAL) Enter the keyword
used by the TACACS+ server.
Range: zero (0) to 65535
Default: 49
GigabitEthernet
GigabitEthernet
loopback
null 0
.
port-channel
sonet
followed by the slot/port
followed by the slot/port information.
vlan
followed by a number from 1 to
port
followed by a number as the port to be
followed by a number
followed by a
Security | 1301
Advertisement
