Dell Force10 TeraScale E Series Reference Manual page 1157

Command
Version 7.8.1.0
History
Related
private-vlan mode
Commands
private-vlan mapping
secondary-vlan
show arp
show interfaces private-vlan
show vlan private-vlan
switchport mode private-vlan
private-vlan mode
c s
Set the PVLAN mode of the selected VLAN to community, isolated, or primary.
Syntax [no] private-vlan mode {community | isolated | primary}
To remove the PVLAN configuration, use the no private-vlan mode {community | isolated |
primary} command syntax.
Parameters
community
isolated
primary
Defaults none
Command Modes
INTERFACE VLAN
Command
Version 7.8.1.0
History
Usage
The VLAN:
Information
•
•
•
Only ports (and port channels) configured as promiscuous, host, or PVLAN trunk ports (as described
above) can be added to the PVLAN. No other regular ports can be added to the PVLAN.
After using this command to configure a VLAN as a primary VLAN, use the private-vlan mapping
secondary-vlan command to map secondary VLANs to this VLAN.
Related
private-vlan mapping
Commands
secondary-vlan
show interfaces private-vlan
show vlan private-vlan
Introduced on C-Series and S-Series
community
Enter
isolated
Enter
primary
Enter
Introduced on C-Series and S-Series
Can be in only one mode, either community, isolated, or primary.
Mode can be set to community or isolated even before associating it to a primary VLAN. This
secondary VLAN will continue to work normally as a normal VLAN even though it is not
associated to a primary VLAN. (A syslog message indicates this.)
Must not have a port in it when the VLAN mode is being set.
Set the mode of the selected VLAN to community, isolated, or primary.
Map secondary VLANs to the selected primary VLAN.
Display the ARP table.
Display type and status of PVLAN interfaces.
Display PVLANs and/or interfaces that are part of a PVLAN.
Set the PVLAN mode of the selected port.
to set the VLAN as a community VLAN, as described above.
to configure the VLAN as an isolated VLAN, as described above.
to configure the VLAN as a primary VLAN, as described above.
Set the mode of the selected VLAN to primary and then associate
secondary VLANs to it.
Display type and status of PVLAN interfaces.
Display PVLANs and/or interfaces that are part of a PVLAN.
Private VLAN (PVLAN) | 1157